|
NEWS
----------------------------------------------------------------------------
Now in production and available are the Ground Signals. Here is a photo of a freshly printed SR Westinghouse Ground Signal signal disc.
Once the disc is painted white and transfer applied, the aspects are automatically coloured by the decal. The socket on the rear is for the operating rod.
The post, lamp and bracket are a one piece print, you just need to add the included moving parts to it..
The signal posts in 7mm and 4mm scales are hollow so wires for LEDs can be threaded through for a working light. the Cap is seprately applied to facilitate this.
A photo of a freshly printed 4mm scale post with wires threaded through.
----------------------------------------------------------------------------
LNER Ground Signal print in 7mm scale, the small bracket is produced seperately to facilitate the fitting of the weightbar. The post is also now hollow to accommodate wires
----------------------------------------------------------------------------
The 3 types of GWR Ground Signal Discs in 7mm scale, the round types have a small pocket on the reverse to accommodate an operating wire. The early type were operated from the back blinder
so don't need one
Apart from the disc, the kits includes the frame and lamp as a one piece print, appropriate weight bars, backblinders and easy to apply waterslide decals for the disc faces
The 4mm scale ones are basically the same just smaller of course
The 2mm scale ones are similar but more allowance has to be made for the change in scale. For instance the stl for the GWR signal lamps, whilst basically the same has to have different supports
With regard to the signal lamps all have a hollow interior to facilitate the fitting of working lights, whilst signal finials have a hollow ball where needed even in 2mm scale.
----------------------------------------------------------------------------
Now available are LNER SR, LMS and GWR (3 types) Ground Signals in 4mm and 7mm scales. 2mm, 3mm, 5mm and 10mm scales are available to special order.
They are available in various forms, ranging from a kit of parts to ready to use items all the way to fully servo motorised option wth working lights
Prices start from a kit of parts for two signals in either 7mm or 4mm scale at £5.00, Fully built and operational but no light or servo are £10.00 each, add £5.00 for a working light, a 4mm or 7mm scale one with fitted servo motor and working light are £30.00 each plus £2.00 per order in all cases UK P&P Overseas at cost.
At the moment the Paypal buttons and baskets are under construction so please email your request and a Paypal Invoice will be generated. This may take a little time to do, so please be patient.
Apart from axles which are in metal, they are currently printed in Anycubic Water washable ABS Like v2.00 resin.